I usually make a quick servo tester on a breadboard and use the serial monitor in the arduino IDE to get the servo positions, ...

Turing the servo 180 degrees changes each segment from one shade to the other, making for an electromechanical seven-segment display. The servos are controlled by an Arduino Mega connected to a ...

Clockception has been inspired by the ClockClock project by Humans Since 1982 and consists of 48 servo motors to drive 24 clock-like faces in an 8×3 grid. “Hi All!

The build relies on that old stalwart, the Arduino Uno, to run the show. It’s hooked up to a DS3231 real-time clock module so it can keep accurate time for long periods, as is befitting a clock.

Making a servo tester using an Attiny85 micro chip, Attiny45 also works for this project. This diy servo tester is as good as any other servo tester, the difference is that it can be programmed to do ...

Serial Servo HATs and Raspberry Pi, Arduino expansion boards 3:15 pm October 2, 2023 By Julian Horsey While building robotics projects, the importance of controllers and motors cannot be overstated.

Sick of telling time the old way? Spice up your time-telling time with the open-source, hackable and Arduino -based DOTKLOK. Basically, you can get a bunch of different ways to tell time.

You have a timer and clock in just about every single device out there these days, but if you want to build you own, Instructables user GeraldF6 shows you how to do so with a Arduino.

I have a standard servo that can rotate approximately 180 degrees (90° in each direction) and is controlled using the included Arduino’s Servo Library. The code is simple too and I’ll try to explain ...