which is a very cool Arduino library for parsing NMEA data streams provided by GPS modules. Thereafter, wire the NEO-6M GPS module to your Arduino as shown in the below table. Next, open one TinyGPS++ ...

The main processor is an Arduino Nano Every, a BMP388 sensor provides the first three metrics, and a BE880 GPS module provides the following three metrics. The RFM69HCW module provides radio ...

and the FLORA GPS module. The FLORA main board is essentially a small, sewable Arduino board. The GPS module obviously provides the tracking capabilities, but also has built-in data logging ...

The extendable Arduino GPS data logger consists of a shield that ... You can also connect the device to a wireless module to transmit data in real-time, making it suitable for remote monitoring ...

The Arduino Due compatible module has an Atmel SAM3A8C ARM controller, a Quectel M95 GSM/GPRS modem and a Quectel L76 GPS/GLONASS module with Assisted GPS and CANbus. The OpenTracker v2 will be ...

Have you ever wanted to create your very watch? If you have then you are sure to be interested in the new video and instructions which have been published by the Adafruit Industries website.

Putting all this together, the operation goes something like this: after power-up, the Arduino Nano sets the coarse and fine PWMs to an initial value (somewhere in the middle), and then waits until it ...

Those upgrades include addition of a GPS module, a case, and a 2,000 mAh built ... and LILYGO says users can program the device using Arduino, Micropython, and PlatformIO-IDE.