Plug the RFID module into the breadboard with enough space around it. Connect the VCC pin to the Arduino's 3.3V (not 5V), and GND to the ground rail. For the data connections, wire SDA to Pin 10, SCK ...

We might think that an AVR microcontroller – e.g. the ATMega328p adopted by the Arduino UNO boards – has the sufficient number of pins to manage an alphanumeric LCD. In a complex industrial ... One ...

These days, you could be forgiven for thinking driving an LCD from a microcontroller is ... Instead, [Ivan] decided to drive it directly from an Arduino Uno. This is easier said than done.

It’s something [Michael Rule] has done some work on, with his ILI9341TTY, a USB serial terminal monitor using an Arduino Uno and an ILI9341 LCD module that supports as many of the extended ...

To link a standard 16×2 LCD directly with the microcontroller, for instance Arduino, you would need atleast 6 I/O pins ... to buy an expensive I2C LCD for this task because readymade serial backpack ...

2.8" LCD shield that uses almost all your I/O pins! This is a full featured, 'smart' ezLCD GPU with the Arduino Uno on the same PCB. The arLCD flash drive give users the ability to simply copy ...

OMC's H19 fiber-optic shield has been adapted as a stackable add-on for the Arduino Uno. It’s designed ... capabilities via an Arduino serial monitor or a 16x2 LCD shield.

The Uno Rev3 ... Software-wise, the Arduino sketch is pretty straightforward with less than 100 lines. So if you want to modify it to add more fans, change the message on the LCD, or use a ...

This module will investigate creating an interactive side-scrolling game using an Arduino. It will also provide experience with advanced usage of the 16x2 LCD screen and its scrolling capabilities.