The wiper of the 10K potentiometer is wired to A0 of Arduino (5V-A0-GND), while anode (A) of the test LED is linked to D5 through a 220Ω-470Ω resistor and cathode (K) to GND. #include ...

But there are really just the two speeds with the current programming. Inside the cool laser-cut box is an Arduino Uno and a 9V battery, plus a current-limiting resistor and the all-important buzzer.

In this experiment we are going to use a element called photoresistor. This sensor allows us to interact with the external environment, through intensity of light. The photoresistor is based on light ...

Making a servo tester using an Attiny85 micro chip, Attiny45 also works for this project. This diy servo tester is as good as ...

It is a pretty common first project to use an Arduino (or similar) to blink an LED. Which, of course, brings taunts of: you could have used a 555! You can, of course, also use any sort of oscillato… ...

The mod works using a MAX7219 chip and Arduino Uno ATmega328 board, which control the two 8×8 LED matrixes making up the eyes. Each matrix is wired up to the MAX2719 chip–expect a lot of cables ...