Connecting together pins 7 & 8 on the p.c. board will make the circuit to stay triggered till it is manually reset after an alarm. This can be very useful if you want to know that there was an attempt ...

Instead, it relies on an ultrasonic distance sensor to detect a hand (or foot) waved in front of the door. An Arduino Leonardo runs the show, sounding a buzzer when the ultrasonic sensor is triggered.

In addition, you also get a matching motor controller board, a rechargeable battery and its charging circuit. Most hoverboard controllers use the STM32F103, so flashing them with your own firmware ...

Aside from the Uno and the ultrasonic sensor, you also need a PHPoC Shield to connect the board to the internet and a power supply to power up your Arduino. Mouse cursor controller using joystick ...

The Development team has been able to reduce the number of manufacturing processes by more than 60 percent resulting in a reduction in the weight of the Arduino board by a massive 98 percent..

Lightweight, low-cost and flexible electronic systems are the key to next-generation smart technologies for military as well as consumer and commercial applications.

Undergrad research assistants are sought for the development of a customized Arduino board for a wearable sensor. The goal of the research project is to develop a wireless transceiver for ...

The sensor is made with one electronic board, including a Bosch transceiver integrated circuit (IC) that drives the output of the Epcos/TDK transformer and evaluates the reflected signal.