All remaining connections of the 16×2 Character LCD are solely reserved for the microcontroller interface. 16×2 Character LCD & Arduino You can find numerous “16×2 Character LCD and Arduino ...

Plug the RFID module into the breadboard with enough space around it. Connect the VCC pin to the Arduino's 3.3V (not 5V), and ...

Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I document my learning in order to be able to inspire other people to make ...

These days, you could be forgiven for thinking driving an LCD from a microcontroller is ... Instead, [Ivan] decided to drive it directly from an Arduino Uno. This is easier said than done.

for instance Arduino, you would need atleast 6 I/O pins to talk to the LCD. However, if you use an LCD module with I2C interface, you only need 2 lines to process the display information. Now a days, ...

MKR IoT Carrier is an IoT interface and peripheral board for Arduino’s MKR WiFi 1010 single-board computer ... and colour, plus a small colour LCD, touch pads, a gesture sensor and two relays to ...

Jon Young has created a new electronic rapid prototyping system called Inventems which also has the ability to interface with both Arduino and littleBits platforms, providing you with a huge scope ...

The increasing frequency was creating problems with the TTL interface between the host and the LCD panel. Power consumption was ballooning, electromagnetic interference (EMI) was on the rise ...