The Ploopy Knob comes fully assembled, and is ready to use right out of the box on Windows and Linux computers. While ...

Check in for a recap of Linux app releases in June 2025, including updates to Qt Creator, Warp, Darktable, Plank Reloaded, ...

The Raspberry Pi Zero 2W is one of the most useful little boards I've ever worked with. At just $15, it's affordable enough ...

Want to code your own scripts and apps using AI? Here's some guidance to get you started off on the right foot.

Use Arduino to handle sensor input and relay control. Pi runs a Python Flask server with a simple UI to toggle GPIO pins via serial commands sent to the Arduino. Use cron jobs on Linux to schedule ...

Whichever Python IDE you choose to run with, at a minimum you'll want an application that does syntax highlighting, code-folding and bracket-matching, has some awareness of the constituent source ...

Raspberry Pi also has a broader selection of I/Os, such as an audio jack, more USB ports, and more. And with 40 general-purpose I/O (GPIO) pins, you can even daisy chain multiple Raspberry Pis ...

Unlike the other editors here, Geany comes installed by default on a standard installation of Raspberry Pi OS. Geany's website refers to the software as an IDE, but Geany is generally regarded as ...

The Arduino Nano and Raspberry Pi Pico are programmed in different ways. The Nano uses the Arduino IDE with the Arduino code language (based on C++). If you're already familiar with this, you'll ...

In addition to the SoC, there is a second chip on the Raspberry Pi 5 board: The new RP1 I/O controller developed by the Raspberry Pi Foundation takes care of controlling the SD card slot, the USB ...

Raspberry Pi 4 and the latest Raspberry Pi 400 share the same Broadcom BCM2711 processor with four Cortex-A72 cores. However, the Pi 4 is clocked at 1.5GHz and the Pi 400 can go up to 1.8GHz. So it’s ...